2019 01 : Here's a free workbench plan that will build you a simple but sturdy workbench in just one day. The workbench includes a bottom shelf and drawers for storage.Learn to wrap the grain around a miter joint. You don’t need special clamps, just some packing tape. By using a couple of furniture-making tricks you can build floating shelves that look worlds better than off-the-rack racks.Gather the materials for the garage workbench using the complete Materials List that you’ll find in ‘Additional Information’ below. Then cut the 3/4-in. plywood parts to size following the Cutting List and Cutting Diagrams that you’ll find below and also in ‘Additional Information.’ Cut a 15-in. x 8-ft. strip out of the 1/4-in. plywood to use as drawer bottoms. The leftover is the perfect width for the back (E); it just needs to be ripped down to length. Don’t cut the drawer fronts until after the workbench carcass is assembled.Sometimes the simplest cabinet plans are the best. That’s definitely true when you’re getting started in woodworking. Begin your exploration of cabinet making techniques with this plan for a hanging spice cabinet. The straightforward techniques in this plan will show you how to build a cabinet the right way.What’s important here is to take note of the stock’s grain orientation. Look at the end grain, here you should find the annual rings running into the planing edge at 90 degrees, this is the radial face. Planing the radial face is often times far more consistent than tangential.